Boss GT-1B Bass Effects Processor

Sampling Frequency: 44.1 kHz
AD Conversion: 24 bits + AF method * AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 24 bits
Effects: 90 types
Patches: 99 (User) + 99 (Preset)
Phrase Loop: 32 sec.
Nominal Input Level: INPUT: -10 dBu, AUX IN: -20 dBu
Maximum Input Level: INPUT: +7 dBu, AUX IN: 0 dBu
Input Impedance: INPUT: 1 M ohm, AUX IN: 27 k ohms
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater
Controls: DOWN switch, UP switch CTL1 switch, EASY SELECT button, EASY EDIT button, FX1/LIMITER button, OD/DS button, PREAMP button, FX2/MOD button, DELAY button, REVERB button, MEMORY EDIT button, EXIT button, ENTER button, MENU button, 1 knob, 2 knob, 3 knob, Expression pedal
Display: Graphic LCD (132 x 32 dots, backlit LCD)
Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks: 1/4-inch phone type, CTL2, 3/EXP2 jack: 1/4-inch TRS phone type, AUX IN jack: Stereo miniature phone type, PHONES jack: Stereo miniature phone type, USB COMPUTER port: USB type B, DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 4, AC adaptor (sold separately)
Current Draw: 200 mA
Expected battery life under continuous use: Alkaline: Approx. 7 hours * These figures will vary depending on the actual conditions of use.
Accessories: Owner's manual, Leaflet "USING THE UNIT SAFELY", Alkaline battery (AA, LR6) x 4
Width: 305 mm / 12-1/16 inches
Depth1: 52 mm / 6 inches
Height: 56 mm / 2-1/4 inches
Maximum height: 74 mm / 2-15/16 inches
Weight (including battery): 1.3 kg / 2 lbs 14 oz

Boss GT-1B Bass Effects Processor

Suggested Products

CONTACT US

SHOP DALE CITY MUSIC

FIND US ON SOCIAL